Aramco :: COMPUTER BASED TESTING (CBT)

SAUDI ARAMCO COMPUTER BASED TESTING (CBT)
 
 
 
Body of Knowledge
 
Mechanical – Welding, Piping, Static Equipment, Rotating Equipment, NDE
Storage Tanks
 American Petroleum Institute (API) Recommended Practice 575, Inspection of Atmospheric
and Low-Pressure Storage Tanks
 American Petroleum Institute (API) Standard 650, Welded Tanks for Oil Storage
 American Petroleum Institute (API) Recommended Practice 651, Cathodic Protection of
Aboveground Petroleum Storage Tanks
 American Petroleum Institute (API) Recommended Practice 652, Lining of Aboveground
Petroleum Storage Tank Bottoms
 American Petroleum Institute (API) Standard 653, Tank Inspection, Repair, Alteration, and
Reconstruction
Pressure Vessels
 American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code,
Section VIII Div.1, Rules For Construction of Pressure Vessels
 American Petroleum Institute (API) Standard 510, Pressure Vessel Inspection Code:
Maintenance Inspection, Rating, Repair, and Alteration
Piping
 American Society of Mechanical Engineers (ASME) B16.5, Pipe Flanges and Flanged
Fittings
 American Society of Mechanical Engineers (ASME) B31.3, Process Piping
Rotating
 American Petroleum Institute (API) Standard 610, Centrifugal Pumps for Petroleum,
Petrochemical and Natural Gas Industries
 American Petroleum Institute (API) Standard 618, Reciprocating Compressors for
Petroleum, Chemical, and Gas Industry Services

 American Petroleum Institute (API) Standard 682, Shaft Sealing Systems for Centrifugal and
Rotary
 American Petroleum Institute (API) Recommended Practice 686, Recommended Practice for
Machinery Installation and Installation Design
 American Petroleum Institute (API) Recommended Practice 571, Damage Mechanisms
Affecting Fixed Equipment in the Refining Industry
NDE
 American Society of Nondestructive Testing (ASNT ) Recommended Practice SNT TC‐1A
Personal Qualification and Certification in Nondestructive Testing Personnel
 American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code,
Section V, Nondestructive Examination
 American Petroleum Institute (API) Recommended Practice 577, Welding Inspection and
Metallurgy
Welding
 American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code,
Section IX, Qualification Standard for Welding, Brazing, and Fusing Procedures; Welders;
Brazers; and Welding, Brazing, and Fusing Operators
 American Petroleum Institute (API) Recommended Practice 577, Welding Inspection and
Metallurgy
 American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code,
Section II, Materials – Part C, Specifications for Welding Rods, Electrodes, and Filler Metals
 American Welding Society (AWS) A2.4, Standard Symbols for Welding, Brazing, and
Nondestructive Examination
Electrical
 National Fire Protection Agency (NFPA) 70, National Electric Code (NEC)
 National Fire Protection Agency (NFPA) 70E, Electrical Safety in the Workplace
 National Electric Manufacturers Association (NEMA) VE 2, Cable Tray Installation
Guidelines

Also Read:  URGENT REQUIRES ELECTRICAL & INSTRUMENTATION ANALYSER FOR A REPUTED OIL AND GAS COMPANY, SAUDI ARABIA. QC Skills

 National Electric Manufacturers Association (NEMA) VE 1, Metal Cable Tray Systems
 ISO-15589-1, Cathodic protection of pipeline systems
 National Fire Protection Agency (NFPA) 79, Electrical Standard for Industrial Machinery
 Underwriters Lab (UL) 508 A, Standard for Industrial Control Panels
 National Electric Manufacturers Association (NEMA) ICS 6, Enclosures
 National Electric Manufacturers Association (NEMA) MG 1, Motors and Generators
 Illumination Engineering Society (IES) Lighting Handbook
 International Electrotechnical Commission (IEC) 60870-5, Telecontrol equipment and systems
Instrumentation
 National Fire Protection Agency (NFPA) 70, National Electric Code (NEC)
 International Electrotechnical Commission (IEC) 60364, Low-voltage electrical installations
 National Electric Manufacturers Association (NEMA) ICS 6, Enclosures
 National Fire Protection Agency (NFPA) 70, National Electric Code (NEC) Art 250
 International Electrotechnical Commission (IEC) 60529, Degrees of protection provided by
enclosures (IP Code)
 International Electrotechnical Commission (IEC) 62271-200, Edition 2.0 High-voltage
switchgear and control gear
 National Electric Manufacturers Association (NEMA) VE 2, Cable Tray Installation
Guidelines
 International Electrotechnical Commission (IEC) TS 60859, Cable Connections for Gas-
Insulated Metal-Enclosed Switchgear for Rated Voltages of 72.5KV and Above
 International Electrotechnical Commission (IEC) 62275, Cable management systems
 International Electrotechnical Commission (IEC) 60332-3, Tests on electric and optical fibre
cables under fire conditions
 International Electrotechnical Commission (IEC) 60269, Low-Voltage fuses

 International Electrotechnical Commission (IEC) 61386-1, Conduit systems for cable
management
 International Electrotechnical Commission (IEC) 60898-1, Electrical Accessories
 International Electrotechnical Commission (IEC) 61158-2, Industrial communication
networks – Fieldbus specifications
 International Standards Organizations (ISO)/ International Electrotechnical Commission
(IEC) 14776-153, Information technology – Small Computer System Interface (SCSI) – Part 153:
Serial Attached SCSI – 2.1 (SAS-2.1)
 International Electrotechnical Commission (IEC) 62828 & IEC 60079-0, Interoperation
guide of field device tool (FDT)
 International Society of Automation (ISA) Recommended Practice RP-60, Instrument
Engineers Society of America Handbook
 International Electrotechnical Commission (IEC) 60870, Part 5
 International Standards Organizations (ISO)/ International Electrotechnical Commission
(IEC) 17025, General requirements for the competence of testing and calibration laboratories
 American National Standards Institute (ANSI)/ International Society of Automation (ISA)
Recommended Practice 5.1, Instrumentation Symbols and Identification
 International Society of Automation (ISA) Recommended Practice RP 60.3, Human
Engineering for Control Centers
 International Electrotechnical Commission (IEC) 60068-3-6, Environmental testing – Part 3-
6: Supporting documentation and guidance – Confirmation of the performance of
temperature/humidity chambers
 International Electrotechnical Commission (IEC) 61158, Specification – Fieldbus
 International Electrotechnical Commission (IEC) 61131 and IEC 61804 (ANSI/ISA-61804),
Standard for Field instruments
 International Electrotechnical Commission (IEC) 60335, Household and similar electrical
appliances – Safety
 International Electrotechnical Commission (IEC) 60730-2-5, Automatic electrical controls –
Part 2-5: Particular requirements for automatic electrical burner control systems
 International Electrotechnical Commission (IEC) 60252-1, AC motor capacitors
 International Electrotechnical Commission (IEC) 62271-200, High-voltage switchgear and
control gear

Also Read:  200+ TOP Industrial Automation Engineer Interview Questions

 International Electrotechnical Commission (IEC) 61499, Function blocks – Part 1:
Architecture
Civil
 American Concrete Institute (ACI) 318, Building Code Requirements for Structural Concrete
and Commentary
 Process Industry Practices (PIP) STS05130, Structural and Miscellaneous Steel Erection
Specification
 Process Industry Practices (PIP) STS03600, Nonshrink Cementitious Grout Specification
 Process Industry Practices (PIP) STE05121, Anchor Bolt Design Guide
 International Building Code (IBC) 2009
 Process Industry Practices (PIP) STS03601, Epoxy Grout Specification
 American Petroleum Institute (API) PUBL 2218, Fireproofing Practices in Petroleum and
Petrochemical Processing Plants
Communication
 Building Industry Consulting Service International (BICSI), Telecommunications
Distribution Methods Manual (TDMM)
 Building Industry Consulting Service International (BICSI), Outside Plant (OSP)
HVAC
 National Fire Protection Agency (NFPA) 70, National Electric Code (NEC)
 Underwriters Lab (UL) 555S, Standard for Safety for Smoke Dampers
 Sheet Metal and Air Conditioning Contractors’ National Association (SMACNA), HVAC
Duct Construction Standard
 American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

Also Read:  Instructions on compilation of Inspection Assignment Package (IAP)


 Uniform Mechanical Code (UMC)
 Copper Development Association (CDA) Publication A4015-14, Copper Tube Handbook
Plumbing
 Uniform Plumbing Code (UPC)
 American Society of Testing and Materials (ASTM) D2241, Standard Specification for
Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
 American Water Works Association (AWWA) C950, Fiberglass Pressure Pipe
 National Fire Protection Agency (NFPA) 13, Standard for the Installation of Sprinkler Systems
Coating
 Steel Structures Painting Council (SSPC) SP 2, Hand Tool Cleaning
 Steel Structures Painting Council (SSPC) SP 1, Solvent Cleaning
 Steel Structures Painting Council (SSPC) SP 3, Power Tool Cleaning
 Steel Structures Painting Council (SSPC) SP 11, Power Tool Cleaning to Bare Metal
 Steel Structures Painting Council (SSPC) SP 10, Near-White Blast Cleaning
 Steel Structures Painting Council (SSPC), Paint Manual, Vol. 1
 Steel Structures Painting Council (SSPC) PA 2, Measurement of Dry Paint
 Steel Structures Painting Council (SSPC) PA 1, Shop, Field and Maintenance Painting
 Steel Structures Painting Council (SSPC) PA 4, Guide to Maintenance Repainting with Oil
Base or Alkyd Painting Systems
 Steel Structures Painting Council (SSPC) Vis-1 Guide, Pictorial Surface Standard Dry
Blast Cleaning
 American Society of Testing and Materials (ASTM) D 1400-94,Test Method for
Nondestructive Measurement of Dry Film

 American Society of Testing and Materials (ASTM) G62, Standard Test Methods for Holiday
Detection in Pipeline Coatings
 American Society of Testing and Materials (ASTM) D 3359, Standard Test Methods for.
Measuring Adhesion by Tape
 American Society of Testing and Materials (ASTM) E 337, Standard Test Method for
Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb
Temperatures)

QA/QC Inspector Qualification Guideline E-Book 

Click below to download button 

Download Now!
https://www.qcskills.com/p/cbt-aramco-category.html

Leave a Reply