SAES – Saudi Aramco Engineering Standard
SAES – Index Page
Information for QA/QC Engineer/Inspectors about Saudi Aramco Standards in the different field.
![](https://1.bp.blogspot.com/-TeL8DEpnDxA/XpxSsDVvT0I/AAAAAAAAAKw/6RLtB34R8JEJcn-Xt86l0J956BDgyzZ6ACLcBGAsYHQ/s1600/SAES-1.jpg)
SAES-A-004
General Requirements for Pressure Testing
SAES-A-005
Safety Instruction Sheet
SAES-A-007
Hydrostatic Testing Fluids and Lay-Up Procedures
SAES-A-020
Equipment Specific P & ID Templates (ESPT)
SAES-A-100
Survey Coordinates, Datum’s and Data Formats
SAES-A-102
Ambient Air Quality and Source Emissions Standards
SAES-A-103
Discharges to the Marine Environment
SAES-A-104
Wastewater Treatment, Reuse and Disposal
SAES-A-105
Noise Control
SAES-A-109
Site Planning for Prayer Shelters
SAES-A-111
Borrow Pit Requirements
SAES-A-112
Meteorological and Seismic Design Data
SAES-A-113
Geo-technical Engineering Requirements
SAES-A-114
Excavation and Back-fill
SAES-A-115
Groundwater Monitoring Well Design, Installation, and Decommissioning
SAES-A-202
Saudi Aramco Engineering Drawing Preparation
SAES-A-204
Preparation of Structural Calculations
SAES-A-205
Oilfield Chemicals
SAES-A-206
Positive Material Identification
SAES-A-207
Catalyst and Desiccant Selection
SAES-A-208
Water Treatment Chemicals
SAES-A-210
Management of Phosphoric Wastes
SAES-A-302
Aviation Fuel Quality assurance Design Requirement
SAES-A-400
Industrial Drainage Systems
SAES-A-401
Closed Drain Systems (CDS)
SAES-A-403
Offshore Platform Drainage Design
SAES-B-005
Spacing and Diking for Atmospheric and Low-Pressure Tanks
SAES-B-006
Fireproofing for Plants
SAES-B-008
Restrictions to Use of Cellars, Pits and Trenches
SAES-B-009
Fire Protection and Safety Requirements of Offshore Production Facilities
SAES-B-014
Safety Requirements for Plants and Operations Support Buildings
SAES-B-017
Fire Water System Design
SAES-B-018
Foam Systems
SAES-B-019
Portable, Mobile and Special Fixed Firefighting Equipment
SAES-B-053
Machine Safety Guarding, Elevators, Escalators and Conveyors
SAES-B-054
Access Egress, and Materials Handling for Plant Facilities
SAES-B-055
Plant Layout
SAES-B-057
Safety Requirements: Refrigerated and Pressure Storage Tanks and Vessels
SAES-B-058
Emergency Shutdown, Isolation, and Depressurizing
SAES-B-060
Fire Protection for Piers, Wharves and Sea Islands
SAES-B-061
Protective Shield for High Health Hazard Piping and Equipment
SAES-B-062
Onshore Well-site Safety
SAES-B-063
Aviation Obstruction Marking and Lighting
SAES-B-064
Onshore and Near-shore Piping Safety
SAES-B-067
Safety Identification and Safety Colors
SAES-B-068
Electrical Area Classification
SAES-B-069
Emergency Eyelashes and Showers
SAES-B-070
Fire and Safety Requirements for Bulk Plants, Air Fueling Terminals and Sulfur Handling Facilities
SAES-B-071
Community And Facility Wide-Area Alerting Systems
SAES-C-001
Process Design of Trays and Packing
SAES-D-001
Design Criteria for Pressure Vessels
SAES-D-008
Repair, Alteration, and Re rating of Process Equipment
SAES-D-100
Design Criteria for Atmospheric and Low-Pressure Tanks
SAES-D-101
Regulated Vendors List Managed Commodities for Pressure Vessels and Storage Tanks
SAES-D-108
Repair, Alteration, and Reconstruction of Storage Tanks
SAES-D-109
Design of Small Metallic Storage Tanks
SAES-D-110
Design of Fiberglass-Reinforced Plastic (FRP) Storage Tanks
SAES-D-116
Underground Storage Tank System
SAES-E-004
Design Criteria of Shell and Tube Heat Exchanges
SAES-E-006
Design Criteria of Double Pipe Heat Exchangers
SAES-E-007
Design Criteria of Air-Cooled Heat Exchangers
SAES-E-014
Design Criteria of Plate and Frame Heat Exchangers
SAES-E-015
Design Criteria of Electric Heat Exchangers
SAES-E-101
Regulated Vendors List for Heat Transfer Equipment
SAES-F-001
Design Criteria for Fired Heaters
SAES-F-007
System Design Criteria of Flares
SAES-G-005
Centrifugal Pumps
SAES-G-006
Positive Displacement Pumps- Controlled Volume
SAES-G-007
Submersible Pumps and Motors for Water Well and Offshore Service
SAES-G-101
Regulated Vendors List for Pumps and Mechanical Seals
SAES-G-115
Lubrication, Shafting Sealing and Control Oil Systems
SAES-G-116
Cleanliness Standard for Lube/Seal Oil and Fluid Power Systems
SAES-H-001
Coating Selection and Application Requirements for Industrial Plants and Equipment
SAES-H-002
Internal and External Coatings for Steel Pipeline and Piping
SAES-H-002V
Approved Saudi Aramco Data Sheets for the Pipeline and Piping Coatings
SAES-H-003
Protective Coatings for Industrial Concrete Structures
SAES-H-004
Protective Coating Selection and Application Requirements for Offshore Structures and Facilities
SAES-H-101V
Approved Saudi Aramco Data Sheets- Paints and Coatings
SAES-H-102
Safety Requirements for Coating Applications
SAES-H-200
Storage, Handling and Installation of Externally Coated Pipe
SAES-H-201
General Specifications for Over-the-Ditch External and Internal FBE Coating of Field Girth Welds
SAES-H-204
General Specifications and Application Procedures of Heat-Shrink Sleeves to Coated Pipe
SAES-I-001
ESP System- Design and Procurement
SAES-I-002
ESP System- Supplier Integration
SAES-J-001
Instrumentation Index
SAES-J-002
Technically Acceptable Instrument Manufacturers
SAES-J-003
Instrumentation- Basic Design Criteria
SAES-J-004
Instrumentation Symbols and Identification
SAES-J-005
Instrumentation Drawings and Forms
SAES-J-100
Process Flow Metering
SAES-J-200
Pressure
SAES-J-300
Level
SAES-J-400
SAES-J-502
Analyzer Shelters
SAES-J-504
Sample Conditioning Systems for Process Analyzers
SAES-J-505
Combustible Gas and Hydrogen Sulfide in Air Detection Systems
SAES-J-600
Pressure Relief Devices
SAES-J-601
Emergency Shutdown and Isolation Systems
SAES-J-602
Burner Management, Combustion and Waterside Control Systems for Water-tube Boilers
SAES-J-603
Process Heaters Safety Systems
SAES-J-604
Protective and Condition Monitoring Equipment for Rotating Machinery
SAES-J-605
Surge Relief Protection Systems
SAES-J-607
Burner Management Systems for SRU Trains
SAES-J-700
Control Valves
SAES-J-801
Control Buildings
SAES-J-901
Instrument Air Supply Systems
SAES-J-902
Electrical Systems for Instrumentation
SAES-J-903
Intrinsically Safe Systems
SAES-K-001
Design and Installation of Heating, Ventilating and Air Conditioning Systems
SAES-K-002
Air Conditioning Systems for Essential Operating Facilities
SAES-K-003
HVAC Systems for Communications Facilities and Data Centers
SAES-K-011
Building Management System
SAES-K-100
Saudi Aramco Mechanical HVAC Code
SAES-K-101
Regulated Vendors List for Heating, Ventilating and Air Conditioning (HVAC) Equipment
SAES-K-110
Regulated Vendors List for Compressors, Expanders, Gears and Steam Turbines
SAES-K-115
Regulated Vendors List for Combustion Gas Turbines
SAES-K-400
Basic Selection of Compressors
SAES-K-402
Centrifugal Compressors
SAES-K-403
Reciprocating Compressors
SAES-K-501
Steam Turbines
SAES-K-502
Combustion Gas Turbines
SAES-K-511
Diesel Engines
SAES-K-600
Side-Entry Mixers
SAES-L-100
Applicable Codes and Standards for Pressure Piping Systems
SAES-L-101
SAES-L-102
Regulated Vendors List for Valves
SAES-L-105
Piping Material Specifications
SAES-L-108
Selection of Valves
SAES-L-109
Selection of Flanges, Stud Bolts and Gaskets
SAES-L-110
Limitations of Pipe Joints and Components
SAES-L-120
Piping Flexibility Analysis
SAES-L-125
Safety Instruction Sheet for Piping and Pipelines
SAES-L-131
Fracture Control of Line Pipe
SAES-L-132
Material Selection for Piping Systems
SAES-L-133
Corrosion Protection Requirements for Pipelines, Piping and Process Equipment
SAES-L-136
Pipe, Flange and Fitting Material Requirements
SAES-L-140
Thermal Expansion Relief in Piping
SAES-L-150
Pressure Testing of Plant Piping and Pipelines
SAES-L-310
Design of Plant Piping
SAES-L-350
Construction of Plant Piping
SAES-L-410
Design of Pipelines
SAES-L-420
Scraper Tray Station and Appurtenances
SAES-L-440
Anchors for Buried Pipelines
SAES-L-450
Construction of On-Land and Near-Shore Pipelines
Maintain Potential Project
SAES-L-460
Pipeline Crossings Under Roads and Railroads
SAES-L-470
Trenchless Pipelines Construction Requirements
SAES-L-610
Nonmetallic Piping in Oily Water Services
SAES-L-620
Design of Nonmetallic Piping in Hydrocarbon and Water Injection Systems
SAES-L-650
Construction of Nonmetallic Piping in Hydrocarbon and Water Injection Systems
SAES-L-810
Design of Piping on Offshore Structures
SAES-L-850
Design of Submarine Pipelines and Risers
SAES-M-001
Structural Design Criteria for Non-Building Structures
SAES-M-005
Design and Construction of Fixed Offshore Platforms
SAES-M-006
Saudi Aramco Security and General Purpose Fencing
SAES-M-009
Design Criteria for Blast Resistant Buildings
SAES-M-100
Saudi Aramco Building Code
SAES-N-001
Basic Criteria, Industrial Insulation
SAES-N-004
Design and Installation of Building Thermal Insulation
SAES-N-100
Refractory Systems
SAES-N-110
Installation Requirements- Castable Refractories
SAES-N-120
Installation Requirements- Extreme Erosion Resistance Refractories
SAES-N-130
Installation Requirements- Refractory Bricks
SAES-N-140
Installation Requirements- Refractory Ceramic Fiber
SAES-O-201
Application of Security Directives
SAES-O-202
Security Fencing
SAES-O-203
Security Gate
SAES-O-204
Security Lighting
SAES-O-205
Integrated Security System
SAES-O-206
Security Devices
SAES-O-207
Power Supply for Security Systems
SAES-O-208
Communications for Security Systems
SAES-O-209
Security Doors
SAES-O-210
Security Locks
SAES-O-211
Identification Cards
SAES-O-212
Security Information Protection
SAES-P-100
Basic Power System Design Criteria
SAES-P-101
Regulated Vendors List for Electrical Equipment
SAES-P-103
UPS and DC Systems
SAES-P-104
Wiring Methods and Materials
SAES-P-107
Overhead Distribution Systems
SAES-P-111
SAES-P-113
Motors and Generators
SAES-P-114
Power System Protection and Control
SAES-P-116
Switchgear and Control Equipment
SAES-P-119
Substations
SAES-P-121
Transformers and Reactors
SAES-P-123
Lighting
SAES-P-126
Power System Automation
SAES-Q-001
Criteria for Design and Construction of Concrete Structures
SAES-Q-004
Installation of Piles and Conductors for Offshore Structures
SAES-Q-005
Concrete Foundations
SAES-Q-006
Asphalt Concrete Paving
SAES-Q-007
Foundations and Supporting Structures for Heavy Machinery
SAES-Q-009
Concrete Retaining Walls
SAES-Q-010
Cement Based, Non-Shrink Grout for Structural and Equipment Grouting
SAES-Q-011
Epoxy Grout for Machinery Support
SAES-Q-012
Criteria for Design and Construction of Precast and Prestressed Concrete Structures
SAES-R-004
Building Architectural Design and Finishes Requirements
SAES-S-007
Solid Waste Landfill Requirements
SAES-S-010
Sanitary Sewers
SAES-S-020
Oily Water Drainage Systems
SAES-S-030
Storm Water Drainage Systems
SAES-S-040
Saudi Aramco Water Systems
SAES-S-050
Sprinkler and Standpipe Systems in Buildings
SAES-S-060
Saudi Aramco Plumbing Code
SAES-S-070
Installation of Utility Piping Systems
SAES-T-000
Telecommunications Standards- Introductions and Indices
SAES-T-018
Telecommunications- Symbols, Abbreviations and Definitions
SAES-T-101
Regulated Vendors List for Communications Equipment and Materials
SAES-T-151
D.C. Power Systems
SAES-T-360
Synchronous Digital Hierarchy Transmission Systems
SAES-T-481
In-Plant Voice Paging System
SAES-T-492
VHF/UHF Land-Mobile and Fixed Radio Communication
SAES-T-493
Digital Trunked Radio System
SAES-T-494
Very Small Aperture Terminal (VSAT) Network Design
SAES-T-500
Central Office (CO) Digital Telephone Switching Systems
SAES-T-521
Circuit Measuring Techniques
SAES-T-555
IP Based Closed-Circuit Television (CCTV)
SAES-T-556
Circuit Quality and Performance
SAES-T-570
Design Residential Telecommunications Infrastructure
SAES-T-603
Telecommunications- Safeguards and Warning Devices
SAES-T-624
Telecommunications Outside Plant- Fiber Optics
SAES-T-625
Inter and Intra Building Fiber Optic Communication Cables
SAES-T-628
Telecommunications- Underground Cable
SAES-T-629
Telecommunications- Buried Cable and Wire
SAES-T-631
Communications Cable Terminals
SAES-T-632
Communications Cable Splicing
SAES-T-633
Communications Splice Closures
SAES-T-634
Telecommunications – Cable Testing and Acceptance
SAES-T-637
Communications Cable Pressure Testing
SAES-T-744
Design Criteria and Installation of Communication Towers
SAES-T-795
Communications Facility Grounding Systems
SAES-T-820
Narrow-Band Video Conferencing Systems
SAES-T-830
Voice Frequency Loop Transmission Objectives
SAES-T-883
Telecommunications – Inductive Coordination
SAES-T-887
Telecommunications: Electrical Coordination- Protection at Power Plants and Radio Stations
SAES-T-903
Outside Plant Electrical Protection and Grounding
SAES-T-906
Telecommunications – Structural Coordination
SAES-T-911
Telecommunication Conduit System Design
SAES-T-912
Communications Feeder Cable
SAES-T-914
Communications Distribution Cable
SAES-T-916
Communications Building Cable
SAES-T-919
Submarine Fiber Optic Cable
SAES-T-920
Telecommunications Cable Information
SAES-T-928
Telecommunications – OSP Buried Plant
SAES-T-938
Telecommunications: Outside Plant Systems- Design
SAES-W-010
Welding Requirements for Pressure Vessels
SAES-W-011
Welding Requirements for On-Plot Piping
SAES-W-012
Welding Requirements for Pipelines
SAES-W-013
Welding Requirements for Offshore Structures
SAES-W-014
Weld Overlays and Welding of Clad Materials
SAES-W-015
Strip Lining Application
SAES-W-016
Welding of Special Corrosion-Resistant Materials
SAES-W-017
Welding Requirements for API Tanks
SAES-W-019
Girth Welding Requirements for Clad Pipes
SAES-X-300
Cathodic Protection of Marine Structures
SAES-X-400
Cathodic Protection of Buried Pipelines
SAES-X-500
Cathodic Protection of Vessel and Tank Internals
SAES-X-600
Cathodic Protection of Plant Facilities
SAES-X-700
Cathodic Protection of Onshore Well Casings
SAES-X-800
Cathodic Protection for Existing Reinforced Concrete Structures
SAES-Y-100
Regulated Vendors List for Royalty/Custody Measurement Equipment
SAES-Y-101
Custody Metering of Hydrocarbon Gases
SAES-Y-103
Royalty/Custody Metering of Hydrocarbon Liquids
SAES-Y-301
Royalty/Custody Measurement of Hydrocarbon Liquids using Radar Tank Gauging System
SAES-Y-501
Dynamic Sampling of Hydrocarbon Liquids for Royal/Custody Transfers
SAES-Z-000
Process Control Standards Index
SAES-Z-001
Process Control Systems
SAES-Z-002
Regulated Vendors List for Process Automation Systems
SAES-Z-003
Pipelines Leak Detection Systems
SAES-Z-004
Supervisory Control and Data Acquisition (SCADA) System
SAES-Z-010
Process Automation Networks
SAES-Z-020
Design and Installation of Fiber Optic Cable Systems for Process Control Networks
Pingback: NSPC - Free Download National Standard Plumbing Code » ENGLOGS.COM